Polyurethane Hand Pour Kits
Available in 8KG, 20KG, 40KG, 120KG, 470KG
Liquid Polyurethane is a two-part component polyurethane system for the manufacture of closed-cell rigid foam materials. It can be processed by hand mixing or through polyurethane foam dispensing equipment.
Applications: Insulation, filling of cavities, buoyancy, etc. The kit contains a flame retardant additive which reduces the flammability of the cured foam material.
Mix Ratio: 1:1 (Parts by weight)
Instructions: The processing temperature of the Part A and Part B should be between 18 to 25°C. Stir both the components thoroughly in the separate original containers, as supplied. Decant the required quantity into a clean plastic container as per the mix ratio 1:1.
Immediately commence mixing the two components together with a high-speed drill and paint stirrer for 15 seconds and pour the reacting liquid into the cavity or mould. Pay particular attention to the mixing of the two components as it is absolutely necessary for good/consistent results.
Safety – Important: DO NOT COMMENCE OPENING / HANDLING FOAM RAW MATERIALS WITHOUT: GOOD VENTILATION, SAFETY GOOGLES, RUBBER GLOVES AND FULL SKIN PROTECTION
Spray Foam Kit
Touch 'n Seal Two Component 1.75 PCF FR Standard foam is a closed cell spray foam insulation that provides Class A fire retardancy as well as thermal insulating and sound attenuating properties when used according to manufacturer's directions. It is suitable for use in commercial, residential, transportation and many other applications.
- ASTM E-84 Class A Fire Resistance
- Reduces energy loss by as much as 40%
- Reduces sound transmission
- Does not shrink or settle like cellulose
- Maintains air seal
- Compatible with all fiber insulation systems including cellulose, fiberglass and stone wool
- Expands to fill small and large gaps, cracks and holes - reducing air exchanges
- High R-value
- Significantly increases structural strength
- Approx. ½ Cubic Metre in the 200FR and 1.4 Cubic Metres in the 600FR
Out of Stock
Perfect for small container conversions, spray foam is the only product that will work. Polystyrene, foil etc will work short term but will eventually fail.